Our Products

Home   / Fire Alarm System

GAS Leak Detector

rueSafe Residential Gas leak detector is designed for detection & early warning for LPG or CNG leakage from cylinders or through pipelines. This wall mounted unit is compact and designed for low cost domestic applications.

The latest model, TrueSafe Cloud can talk to your Smartphone using your home wifi connection. In case of gas leakage at home you can get notified where ever you are.

Feature :
  • Kitchen Platform Panel mountable
  • Automatic Calibration at the desired level of LEL (Usually 10% of LEL).
  • In addition, it can detect heat
  • Can be interfaced with Gas Detection Panel through PFC relay output

Heat Detector

This product is used for detect the Heat and sending signal to control panel. Thermistor base technology is used in this sensor. The basic principle of detecting atmospheric temperature By using Temperature sensing Resistor it is call as Thermistor. When atmospheric temperature is increases above 60°C then detector is generate signal and send to Fire panel OR Control Panel.

Feature :
  • Dual Fire LED Indication.
  • Thermistor Technology is used
  • Current Output
  • Stylish Look
  • Compatible with all Fire Panel
  • Low Standby Current

View More Details

Manual Call Point

TManual call points are designed for sending an alarm manually after verification of fire or emergency condition exists, by operating the push button the alarm signal can be raised. This button is a kind of specialism conflagration set used for artificial start in the system of self-motion conflagration. One has to break the glass faceplate of the conflagration button with full strength and the signal will send to the controller. It is for one time use

Feature :
  • Alarm triggering by pressing the black marking or breaking the glass pane
  • Protection against injury through foil-labeled glass pane
  • Surface mounted
  • Glass pane design

View More Details

Smoke Detector

This product is used for detect the Smoke and sending signal to control panel. Photoelectric technology is used in this sensor. The basic principle of detecting carbon particle present in smoke by using Infrared diodes. When smoke enters the chamber diode receives more light and the detector gives out alarm signal and also turn ON red led for local indication.

Feature :
  • Dual fire LED indication.
  • LPCB approved.
  • Photo-electric technology is used.
  • Current output.
  • Stylish look.
  • Compatible with all fire panel.
  • Low standby current.

View More Details

Fire Alarm System PANEL

There are two types of panels – Conventional & Addressable. Conventional panels are suitable for small applications like Office, Godown, Store or Small Projects & Addressable panels are suitable for Factories, Industries, Control Rooms, Airport etc. Smoke detectors in a zone (or area) of the building are all connected to the same pair of wires. If any of these detectors report alarm, a single indication is shown on the control panel, means that the exact location of the alarm is not shown but zone area will be indicated on panel.